These electrodes are encapsulated in epoxy tubes that are ideally suited for probing ionic solutions and live tissues.  The solid Ag-AgCl tip can be frequently resurfaced with fine sandpaper.  Electrodes are terminated with a
20 mm tinned copper wire for connection of choice.

Specifically designed for probing closely spaced potentials, these insulated electrodes have a solid 1 mm dia.  Ag-AgCl sensor tip.  A glass or plastic tubing shaft, 50 mm long, completely insulates the silver wire.  Electrode pellets and wires are sealed to 20 mm from the glass or plastic tubing for connection of choice.  The polycarbonate plastic tubing is flexible and unbreakable.

E252 Electrodes have a solid 2 mm dia. Ag-AgCl sensor tip.  A glass tubing shaft, 2 mm diameter - 50 mm long, completely insulates the silver wire.  Electrode pellets and wires are sealed to the shaft with epoxy resin.  The silver wire extends 20 mm from the glass tubing for connection choice.

These solid Ag-AgCl electrodes offer many advantages.  They are low-profile, due to a thin coating of hard epoxy on the back side - only one side and the edges make skin contact.  A white silicone rubber insulated  wire is permanently connected and sealed to the electrode resulting in a waterproof electrode.  The 20 cm wire is unterminated for connection of choice. These electrodes can be used as biopotential surface electrodes or subcutaneously in animal studies.

The Leading Manufacturer of Reusable
Sintered Silver-silver chloride Electrodes
— 40 years of experience —